Welcome to the Mariner 2 documentation!
=======================================

Mariner 2 is a web interface for controlling MSLA 3D Printers based on `ChiTu
controllers <https://www.chitusystems.com/>`_. These are controllers commonly
used on 3D Printers by many brands such as Elegoo and Phrozen, making mariner
compatible with a wide range of printers.

|Screenshot|


Features
--------

Mariner 2 provides the following features:

- Wide range of :ref:`supported MSLA 3D printers <Supported Printers>`.
- Web interface with support for both desktop and mobile.
- Upload files to be printed through the web UI over WiFi!
- Remotely check print status: progress, current layer, time left.
- Remotely control the printer: start prints, pause/resume and stop.
- Browse files available for printing.
- Inspect ``.ctb``, ``.cbddlp`` and ``.fdg`` files: including image preview,
  print time, slicing settings and other metadata.

.. toctree::
   :hidden:

   supported-printers
   install
   troubleshooting
   contributing

.. |Screenshot| image:: /_static/screenshot.png